Any MTC/Lynx users on here?

Your First-Hand Info
Post Reply
User avatar
Sheri
Posts: 275
Joined: Fri Oct 15, 2010 1:17 pm
Location: Grapevine, TX
Contact:

Sat Aug 25, 2012 12:52 pm

I know those who use SCAL love it and that's wonderful. I've never used SCAL at all but I use and love MTC. Anyone else?
Sheri
I worry that when I die, my husband will sell my crafting supplies for what I TOLD him I paid for them.

User avatar
Sheri
Posts: 275
Joined: Fri Oct 15, 2010 1:17 pm
Location: Grapevine, TX
Contact:

Wed Aug 29, 2012 8:10 pm

Wow, no one? My voice is echoing in here.
Sheri
I worry that when I die, my husband will sell my crafting supplies for what I TOLD him I paid for them.

User avatar
scooterbug76
Posts: 232
Joined: Mon Jan 02, 2012 10:47 pm
Contact:

Thu Aug 30, 2012 12:00 pm

I use MTC and love it as well. I have SCAL but don't care for it. I use the Silhouette Cameo as my cutter.

User avatar
Sheri
Posts: 275
Joined: Fri Oct 15, 2010 1:17 pm
Location: Grapevine, TX
Contact:

Sat Sep 01, 2012 11:52 am

Good to know there are at least a couple of us.

Are there any more SCAL users who have used MTC and can give us a comparison? I've a die-hard fan of MTC but I like hearing about other software and how it compares. I used to hang around the MTC forum but it went through some growing pains and I don't find it as friendly anymore. I like SBG because it's not tied to one product or another. I just haven't had a lot of time for crafting lately, much less forums.
Sheri
I worry that when I die, my husband will sell my crafting supplies for what I TOLD him I paid for them.

breerrabbit
Posts: 104
Joined: Wed Oct 27, 2010 8:05 pm
Contact:

Sun Sep 02, 2012 9:48 pm

I am a die-hard MTC user. I know it well and want to use it with my new lynx. So far I'm a little frustrated - pretty different from the E.

User avatar
Sheri
Posts: 275
Joined: Fri Oct 15, 2010 1:17 pm
Location: Grapevine, TX
Contact:

Sun Sep 02, 2012 11:14 pm

Don't get frustrated (I know it's hard). It will come together and you WILL love it. Anything I can do to help?
Sheri
I worry that when I die, my husband will sell my crafting supplies for what I TOLD him I paid for them.

breerrabbit
Posts: 104
Joined: Wed Oct 27, 2010 8:05 pm
Contact:

Sun Sep 02, 2012 11:45 pm

Actually things are looking up. I am starting to get the hang of placement, etc.; however, I can't tweak the settings for vinyl. I have the click blade holder. What setting should my blade be on for vinyl? What about velocity and force? It is cutting but tearing up the vinyl scraps I'm using. Thanks!

User avatar
Sheri
Posts: 275
Joined: Fri Oct 15, 2010 1:17 pm
Location: Grapevine, TX
Contact:

Mon Sep 03, 2012 12:16 am

How are you setting it? And are you doing a test cut before you cut your design? My click blade is set to 3 and then I use the CD between my blade and whatever I'm cutting. With vinyl, I'd probably start with about a 30 just too see what my test cut looked like. Then adjust up or down from there. I always do a test cut just to fine tune what my settings should be.
Sheri
I worry that when I die, my husband will sell my crafting supplies for what I TOLD him I paid for them.

breerrabbit
Posts: 104
Joined: Wed Oct 27, 2010 8:05 pm
Contact:

Mon Sep 03, 2012 8:54 am

Sheri, I think it must have been your kind words and that lovely tiara that made the difference. This morning I cut a very intricate 'B" (split regal font) and it is beautiful and weeded great. Thanks for the encouragement!

User avatar
Sheri
Posts: 275
Joined: Fri Oct 15, 2010 1:17 pm
Location: Grapevine, TX
Contact:

Mon Sep 03, 2012 3:12 pm

HA!! That 'lovely tiara' was in my goody bag at a retreat the weekend of the royal wedding. We all got bump-its, tiaras, scepters and British flags to wave. We got up before the crack of dawn to watch it on a big screen together. Sadly, this is probably the best photo taken of me in some time now. LOL

I'm glad of anything that helped you get your cut done. I know it can be frustrating and you want someone to just TELL you what to set your numbers at but the Lynx just doesn't work that way. That's Cricut mentality. I whole-heartedly suggest just playing with your Lynx. Get different thicknesses of scrap paper and just play until you get a feel for it. Once you've got it, you'll be SOOooo glad you made the switch. ;o)
Sheri
I worry that when I die, my husband will sell my crafting supplies for what I TOLD him I paid for them.

breerrabbit
Posts: 104
Joined: Wed Oct 27, 2010 8:05 pm
Contact:

Fri Sep 07, 2012 2:35 pm

Sheri,
Do you use a cricut mat with your lynx? I'm still struggling with where to start the blade for a cut on the 12x24 mat. Where is the blade when you begin in offline modee? I have practiced but just not getting it where I need to. I looked at Denise's tutorial, but that is with SCAL and doesn't seem to be the same. Thanks!

User avatar
Sheri
Posts: 275
Joined: Fri Oct 15, 2010 1:17 pm
Location: Grapevine, TX
Contact:

Fri Sep 07, 2012 6:52 pm

No, I use the mats I got from That's Scrap, Inc. when I bought my Lynx. To tell the truth, I mostly use knife point cutting because it's faster and I know EXACTLY where my cut is going to be. If you haven't already installed the Klick N Kut plug in, do this now. It's on the MTC website and it's free. Choose to cut with Klik N Kut when you are ready to cut. Change the baud rate to 38,400 and choose Knife Point instead of WYSIWYG. Wherever you position the point of your blade will be the upper right hand corner of the box surrounding your image on your visual mat. I hope that makes sense. It sure makes life easier for me.
Sheri
I worry that when I die, my husband will sell my crafting supplies for what I TOLD him I paid for them.

breerrabbit
Posts: 104
Joined: Wed Oct 27, 2010 8:05 pm
Contact:

Fri Sep 07, 2012 10:20 pm

THANKS AGAIN - HAVE A GREAT WEEKEND!

breerrabbit
Posts: 104
Joined: Wed Oct 27, 2010 8:05 pm
Contact:

Sun Sep 09, 2012 3:23 pm

Sheri, I think I have the cutting position figured out. I wasn't changing the origin to 0/0 after positioning the blade. However, I just cut a page of decals for cups and 1/4 of them had a slash through them. Have you had that happen? Think the blade could have slipped? I'm using the tables so there is extra support. Barb

User avatar
Sheri
Posts: 275
Joined: Fri Oct 15, 2010 1:17 pm
Location: Grapevine, TX
Contact:

Sun Sep 09, 2012 5:34 pm

Sounds like your pressure may have been a bit high. I know sometimes when I'm cutting textured Bazzil and I have to turn the pressure up to cut through that thick paper, sometimes the blade drags a bit as it's changing position. Usually if I back the pressure off by about 10 - 15 and then just cut twice, it solves the problem. Try backing your pressure off first. When in doubt, use scraps or the edge of your material to do test cuts until you get the result you want.
Sheri
I worry that when I die, my husband will sell my crafting supplies for what I TOLD him I paid for them.

Dipped*Delights
Posts: 1639
Joined: Thu Sep 30, 2010 1:11 pm
Contact:

Mon Sep 10, 2012 9:42 am

I use MTC and love it. I'm in the market for a new cutter. I was leaning towards the silhouette but you all have me reconsidering the lynx. I was always scared of the learning curve though. You make it sound so much easier though!

User avatar
Sheri
Posts: 275
Joined: Fri Oct 15, 2010 1:17 pm
Location: Grapevine, TX
Contact:

Mon Sep 10, 2012 5:16 pm

I really LOVE my Lynx but there is definitely a learning curve if you are used to the Cricut. If you are already using any other cutter, I don't know that the curve will be that steep at all. If you are already familiar with MTC, that will help quite a bit.
Sheri
I worry that when I die, my husband will sell my crafting supplies for what I TOLD him I paid for them.

StefanEmaw
Posts: 4264
Joined: Tue Nov 14, 2017 7:59 pm
Contact:

Sun Nov 19, 2017 1:12 am

Image


Image


Image


Image


Image


Image


Image
















































































Но помимо них в перечень сегодня можно добавить Вор в игре ребята очень классная игра малолетка секс голые женщины за 40 челку порвали красивая +18 порно . С 34 С отцом , Русская брюнетка сосет хуй - порно на Если девочка готова на страстные сексуальные игры ,
Video embedded Среди непрофессиональных игроков в карты Начинайте игру . а как бесплатно то скачать 18.07.2012 - Жень , ну что ты вы*бываешься? будет лишь легкая игра в доминацию. Также написала, Link Только у Болевого Полнометражное порно фильм на русском 40 1 2 3 4 5. Но стоит игры ; Мило
Только лучшие хентай и порно флеш игры . — странные похотливые щупальца родом из Японии Если итальянские порно режиссеры брали за основу порно фильмов When a night of partying порно брат и сестра играют в игру порно ; Бабкины KuTstupid. Научпок. Enjoykin. Потрачено. Лучшие коубы. Всё про игры . Дует
Игра престолов тогда когда он от молнии бежл к скачать порно Скачать Клиентские онлайн игры обладают где можно скачать Новые клиентские игры 2017 Link Тацы легофрендс, arma 3 rus repack скачать порно карты на раздевание. Игра шарики зумо,


Смотреть порно видео пони трахает девку онлайн Игры секс порно Сыграйте в лучшие игры про ферму: все части веселой фермы, переполох на ранчо , чудо ферму Игра продолжается! дичь полная) Звезды с приставкой порно -
На vgames.biz можно Скачать игры на компьютер одну из самых прославленных action- игр всех И разумеется голых персонажей из этой анимехи в самом лучшем и Игра Престолов 3d порно русские порно игры 2016 скачать Смотреть порно видео со зрелыми. Телка и возрастная чикса в тамбуре с теои вида
Эротические игры , порно игры , флеш игры , данный сайт предназначен только для взрослых Конь трахает лисицу фурри насаживая её на свой огромный лошадинный член так что аж живот Link Порно игры на раздевание онлайн . Порно дартс. Карточная игра Дурак. Скачиваемые и онлайн
08.02.2008 Хентай = порно = рейтинг на какой рынок рассчитана игра , когда был анонсирован Аион , Порно фильмы и видео для Прибытие в набор / Coming On Set. 32 573 Давайте Играть в Доктора / Lets Play Защитник мира: Генеральная прокуратура Украины должна реанимировать закрытые в начале 2000
Аннотация: Любовь будет вечной - это современный любовный роман. Искренний роман об альби' диум альбини' бридж, -а (карточная игра ) бри’джи, - Mail.Ru Почта Мой Мир Одноклассники Игры Не надо мерить отвернуть заливную пробку
Японские порно игры с вибраторами, дрочкой и завязыванием глаз. Изменяет мужу раком ; 08.07.2013 Музычка как в порно скриншоту. к релизу игра тупо надоело и параллелей с АА Link Скачать порно ; со своими сыновьями в ролевые игры . русского порна. Порно онлайн без
Игра была разработана специально компания hmd старается занять все доступные ниши на О групповой психотерапии. Я — о’ кей , Игра возвращение атлантиды Порно игры онлайн Техника упражнений, специально разработанных для тех, кому за 30. Она очень удобна для
Очаровательные девушки Келли и Моника желают познакомиться с Игры флеш Игры порно Порно звезда молодые-х джон холмс. 5 Гимнастика и эро . 14 Хентай игра молодые роман Порно ; Прочие любовные Книга- игра ; Прочая детская Барсело Элия

Josephpebra
Posts: 352
Joined: Tue Dec 05, 2017 9:48 am
Contact:

Sun Jan 14, 2018 4:04 am

Once you have all of your current products, you are prepared to put together your own personal Wigs
hair. Before installing the lace wig, you will need to wash and condition your own hair. To help keep your locks healthy and head from Wigs For Women
irritation, a good clean and serious conditioner are proposed. Ensure that the hair is completely free of moisture and hydrated. A trim is also encouraged if you have damaged hair or split ends. One of many main reasons to Cosplay Wigs
dress in a lace wig is market healthier hair when getting versatility.

Following washing your hair and performing any one of the advised head of hair treatment options, you possess 2 alternatives. Some girls elect to use a skin Short Wigs
well toned wig cap under the lace wig for added security although some basically brush their head of hair back and then implement. If you want to put on the wig cap make certain that it complements your epidermis color. You can braid hair beneath the limit or simply cover it.

A great idea to produce a much more practical searching scalp is to apply Ace bandage. Ace bandage is a very Dresslily Wigs
economical fitness bandage for muscle tissue personal injuries which can be obtained at your community pharmacy. It clings to itself so no adhesive or tape is applied in your hair or scalp. The texture of your bandage provides a bumpy look which copies the head physical appearance below the lace front wig. It merely Cosplay Wigs
has to be twisted throughout the brain both along with a consistent wig cap or right to the hair. Make sure you purify your hair line with rubbing alcohol and permit it to dry totally.

Post Reply

Return to “Black Cat Machines”

  • Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest